The Handy THDS Instruction Manual page 8

STEP 3
•
As per Pic.5, place a Connect Pole onto the top of the leg and lock with a Carriage Bolt M6X35 and a Wing
Nut M6.
•
Repeat to assemble the second Connect Pole
STEP 4
•
Attach the Handle with the Connect Pole, lock using two Hex Bolts M6X30 and M6 Wing Nuts on the left.
•
Insert the Adjustable Wire into the hole in the Index Plate, then attach the Index Plate onto the right side
of the Handle and Connect Pole using two Hex Bolts M6x30, one Lock Nut M6 and one Wing Nut M6.
•
Insert the Wire Clip Bottom Plate onto the Connect Pole using a Hex bolt M6x30 & Lock Nut M6.
•
Fix the Wire Clip Plate to the Adjustable Wire and Wire Clip Bottom Plate using a Screw M5x10 and Lock
Nut M5.