Stop Mode - Boss RC-10R Parameter Manual

MENU
Parameter Value
Specifies operation when stopping the rhythm.
IMMEDIATE
MEASURE END

STOP MODE

LOOP END
MEAS END+ENDING
LOOP END+ENDING
FADE OUT
1–100
FADE OUT TIME
Specifies the order in which recording, overdubbing, and playback are switched.
REC0DUB0PLAY
LOOP REC MODE
REC0PLAY0DUB
Specifies how the looper tracks are used.
SINGLE
SERIES
LOOP TRACK MODE
PARALLEL
0–100
LOOP TRK1 LEVEL
0–100
LOOP TRK2 LEVEL
4
Explanation
Stops immediately.
Plays to the end of the measure and stops.
Plays to the end of the loop and stops. (*1)
Plays to the end of the measure, adds an ending, and stops.
Plays to the end of the loop, adds an ending, and stops. (*1)
Fades out.
Adjusts the fade-out time when STOP MODE is set to "FADE OUT. "
Switch in the order of recording0overdubbing0playback.
Switch in the order of recording0playback0overdubbing.
Use only TRK1.
Switch between TRK1 and TRK2. (*1)
If SYNC is on, rhythm PTN1 switches simultaneously with TRK1, and PTN2 with
TRK2.
TRK1 and TRK2 can be used simultaneously.
Although the two tracks can play back simultaneously, recording and overdubbing
is possible only for one or the other track.
For details on how to switch tracks, refer to "Switching the Loop Tracks" (p. 15).
Adjusts the TRK1 playback volume.
Adjusts the TRK2 playback volume.