Output Mode - Boss RC-10R Parameter Manual

Parameter Value
When OUTPUT FILTER is "INPUT & LOOPER"
JC-120
KATANA
COMBO 112
FILTER TYPE
COMBO 212
STACK 412
-12–0–+12
ADJUST EQ: LO, HI
Specifies how sound is output from the OUTPUT jacks.
STEREO

OUTPUT MODE

A:LOOP B:RHYTHM
1–10
DISPLAY CONTRST
The RC-10R has a function that turns the power off automatically. When ten hours elapse after you stop playback
or recording, the power turns off automatically. Approximately 15 minutes before the power turns off, a message
appears in the display.
When the unit is shipped from the factory, this function is "ON" (power-off in ten hours). If you want the power to
always remain on, set this "OFF. "
AUTO OFF
When the power turns off, the settings you had been editing are lost. If you want to keep your settings, save them in
advance.
OFF
ON
NOTE
Explanation
Simulates the character of a Roland JC-120.
Simulates the character of a BOSS KATANA.
Simulates the character of a combo-type guitar amp equipped with a 12-inch
speaker.
Simulates the character of a combo-type guitar amp equipped with two 12-inch
speakers.
Simulates the character of a stack-type guitar amp equipped with four 12-inch
speakers.
Adjusts the character of the filter.
Output in stereo from the OUTPUT jacks.
Output the input and the looper from the OUTPUT A jack, and the rhythm from the
OUTPUT B jack.
Adjusts the brightness of the display.
The power does not turn off automatically.
The power turns off automatically ten hours after you stop playing or operation.
MENU
13