Setting The Operation Mode For The [Repeat Rate] Knob - Boss RE-2 Owner's Manual

Various Settings

Setting the Operation Mode for the [REPEAT RATE] Knob

You can switch the operating mode of the [REPEAT RATE] knob to change the tape speed's adjustable range. The setting range for
the tap delay time (delay time for playback head 1) also changes at the same time.
1. With the power turned off (nothing should be plugged into the INPUT A jack), set the [MODE] knob to
"9".
2. While holding down the pedal switch, turn on the power (by connecting a plug to the INPUT A jack).
3. Turn the [ECHO] knob to select a mode.
Knob position Mode
Normal
Minimum value
Long
Maximum value
4. Press the pedal switch to exit the settings.
8
The [REPEAT RATE] knob operates in the same range as the Roland RE-201.
The value for the tap delay time can be set to a maximum of one second.
The setting range for the [REPEAT RATE] knob is twice that of Normal mode.
The value for the tap delay time can be set to a maximum of two seconds.
Function