Exp Hold; Output - Boss Vocal Performer VE-22 Reference Manual

EXP HOLD

This lets you set whether to retain the expression pedal value that
was used in the previous memory when you switch to a new memory
(HOLD: ON), or not (HOLD: OFF).
When EXP HOLD is set to "ON", the expression pedal value from the
previous memory is retained when you switch between memories in
the middle of a song, which saves you the trouble of operating the
expression pedal again.
This setting is a system parameter that's globally enabled for all
memories.
The data is automatically saved, even if you don't perform the
MEMORY WRITE operation.
1 .
Press the [MENU] button.
The MENU screen appears.
2 .
Turn the [MEMORY] knob to select the "EXP HOLD"
row.
All items in the selected row are underlined.
3 .
Press the [EFFECT] knob.
The EXP HOLD screen appears.
4 .
Turn the [HARMONY] knob to make the setting.
Parameter Value
HOLD OFF, ON
5 .
Press the [EXIT] button several times to return to
the play screen.
Explanation
This lets you set whether to
retain the expression pedal value
that was used in the previous
memory when you switch to a
new memory (HOLD: ON), or not
(HOLD: OFF).

OUTPUT

Configure these parameters according to the device that's connected
to the OUTPUT.
This setting is a system parameter that's globally enabled for all
memories.
The data is automatically saved, even if you don't perform the
MEMORY WRITE operation.
1 .
Press the [MENU] button.
The MENU screen appears.
2 .
Turn the [MEMORY] knob to select the "OUTPUT"
row.
All items in the selected row are underlined.
3 .
Press the [ECHO] knob.
The OUTPUT screen appears.
4 .
Turn the [HARMONY] and [EFFECT] knobs to make
the settings.
Parameter Value
MST LEVEL
(MASTER 0–200
LEVEL)
Adjust this to match the audio equipment (mixer
or monitor amp) that's connected to the OUTPUT.
MONO
MODE
STEREO
FX/DRY
5 .
Press the [EXIT] button several times to return to
the play screen.
Useful functions
Explanation
Adjust this to match the input
level of the audio equipment
(mixer or monitor amp) that's
connected to the OUTPUT.
The recommended value is 100.
Converts the stereo signal inside
the VE-22 to mono, and outputs
this to the OUTPUT L and R
connectors.
Uses both OUTPUT L and R to
output a stereo signal.
The signal that's output from
OUTPUT L is the dry sound plus
the effect sound converted to
mono. The signal that's output
from OUTPUT R has no effects
applied (bypass).
21