Table of Contents
Advertisement
Securing the soft-close mechanism
Open the appliance door 90°.
Push on the cover until it clicks
into position.
Push the hinged arm into the
opening on the door hinge.
Insert the pin into the door hinge
from above. Turn this with a screw-
driver (by approx. ¼ turn) until both
lugs on the pin click into position cor-
rectly in the grooves.
Pull out the red safety device .
Tip: Keep the red safety device in case
you want to change the door hinging
again at a later date.
Fitting the upper covers
Fit the cover on the door hinge.
Fit the panel so that it clicks into
position.
Push on the outer cover .
Close the appliance door.
Installation
109
Advertisement
Table of Contents
