Resetting to the factory default set-
tings
All appliance settings are reset to the
factory default and the appliance is
switched off.
Accessing information
Appliance data (model number and
serial number) is shown in the display.
Tip: This data is important when report-
ing an appliance fault to Miele Service.
Confirm with
OK
tion screen.
– Displaying licence agreements
Licences used can be displayed via ©.
to leave the informa-
Selecting further settings
Reminder to replace the Active
AirClean filters
The appliance is fitted with Active
AirClean filters.
If the charcoal filter indicator has been
activated, you will be reminded to re-
place the filters after approx. 12 months
(see "Cleaning and Care" - "Replacing
the charcoal filters").
The symbol will then appear in the
start screen in the temperature display
and an audible tone will sound (if
switched on).
Touch the symbol to confirm the mes-
sage. This resets the counter and the
display changes back to the start
screen.
47