Table of Contents
Advertisement
Message
is lit up yellow in the
one of the temperature
displays and an alarm is
also sounding.
is lit up red in the
one of the temperature
displays and an alarm is
also sounding.
Cause and remedy
The door alarm has been activated (also see "Tem-
perature and door alarm").
Touch
in the display.
The alarm message is confirmed and the warning
tone stops.
The current temperature reappears in the temperature
display.
Close the relevant appliance door.
The alarm will stop.
The temperature alarm has been activated (see
"Temperature and door alarm"). The temperature in
the respective section has risen higher or fallen lower
than the temperature set.
This could be due to, for example:
– too much warm ambient air entering the cabinet
when bottles are being rearranged or taken out,
– when a large number of bottles are stored for the
first time,
– an appliance door being opened too often, or be-
ing left open.
– a large quantity of fresh food being placed in the
freezer at once without switching on the Super
freeze function.
– an interruption to the power supply.
– a fault with the appliance.
Touch
in the display.
The alarm message is confirmed:
the alarm stops.
The start screen appears in the display: the warmest
temperature recorded in the freezer will flash for about
1 minute in the display. Then the temperature display
will change to the current temperature in the freezer.
You can exit from the flashing temperature display
early:
Touch the temperature display.
Problem solving guide
goes out and
69
Advertisement
Table of Contents
