Table of Contents
Advertisement
Refitting the lower door
Place door onto the hinge pin from
above.
Insert middle hinge pin through
middle hinge plate into the bearing
bush of the lower appliance door.
Important. The lug on the hinge pin
must point to the back again.
Securing the lower soft-close mech-
anism
Open the lower door.
Pull cover along hinged arm on
the soft-close mechanism.
Open the door 90°.
Push hinged arm into the opening
on holder .
Insert pin into the hinge plate from
above. Turn this with a screwdriver
(approx. ¼ turn) until both lugs on the
pin click into position correctly in the
grooves.
Push cover further along hinged
arm on the soft-close mechanism
until it locks into position on the
holder for the soft-close mechanism.
Pull out red safety aid .
Tip: Keep the red safety aid in case you
want to change over the door hinging
again at a later date.
Installation
107
Advertisement
Table of Contents
