Installing the TPE EMI Clip
The twisted-pair Ethernet (TPE) EMI clip can be identified by its elongated shape
and two tabs. See
FIGURE 1
Tabs (2)
TPE EMI Clip
FIGURE 1
To Install the TPE EMI Clip
For this procedure, refer to
1. Locate the TPE connector on the Ultra 10 motherboard.
The connector is located at the rear corner of the system case.
TPE Connector and Clip Installation
FIGURE 2
.
.
FIGURE 2
1
2
3
Sun Ultra 10 EMI Retrofit Guide
3