Advertisement
Installing the New CD-ROM Drive Cable
The new CD-ROM drive cable is an 80 conductor, type ATA-66. The end connectors
are labeled "DRIVE" and "MOTHERBOARD". A large ferrite filter is installed near
the DRIVE connector. Underneath the ferrite filter are dual lock reclosable fasteners.
See
FIGURE 7
Connects to
CD-ROM drive
FIGURE 7
Note – Do not separate the dual lock fasteners or remove the adhesive backing from
the fasteners as this time. You perform this task later in the procedure.
8
Sun Ultra 10 EMI Retrofit Guide • May 2002
.
Connects to
motherboard
Dual lock fasteners
underneath (2)
Replacement CD-ROM Drive Cable
Advertisement
