Aaeon FSB-866G Manual page 43

F u l l - s i z e C P U C a r d
5.1 Installation:
Insert the FSB-866G CD-ROM into the CD-ROM Drive. And
install the drivers from Step 1 to Step 4 in order.
Step 1 – Install INF Driver
1. Click on the Step 1 –INF folder.
2. Click on the infinst_auto 1 folder and then double click
on the Setup.
3. Follow the instructions that the window shows.
4. The system will help you install the driver automatically.
5. Please re-start your computer.
Step 2 – Install VGA Driver
1. Click on the Step 2 –VGA folder.
2. Choose the OS your system is.
3. Double click on the Setup located in each OS folder.
4. Follow the instructions that the window shows.
5. The system will help you install the driver automatically.
6. Please re-start your computer.
Step 3 – Install LAN Driver
1. Click on the Step 3 --LAN folder.
2. Click on the Yukon_EC_PLUS_04_08 folder.
3. Choose the OS your system is.
4. Follow the instructions that the window shows.
5. The system will help you install the driver automatically.
Chapter 5 Drivers Installation
F S B - 8 6 6 G
5 - 3