Lfp Hot Swap Charger - Jaco EVO User Manual

NOTE: Front Status Panel as viewed
from inside Cart Top Assembly, front
section
Optional connection for
work surface light (not
available)
Estimated run-time per Power Blade Battery Pack:
The JACO Hot-Swap Power Blade Battery Packs are designed to be a safe and reliable
solution for health care applications. As with any battery system, the amount of time
that the battery will power the equipment is dependent on the device (PC, Laptop, LCD
Monitor...) power demand. To help reduce power demand and increase the Power
Blade Battery Pack runtime, we suggest that you set the monitor to enter sleep mode
after 5 minutes of idle time.
The following are estimated runtimes per Blade Battery Pack, your results may vary.
Watts
40
45
50
55
60
65
70
75
80
90
100

LFP Hot Swap Charger

The Power Blade Charger can be placed on a tabletop or installed on the wall for
convenient point of use access. With either installation, the Power Blade Charger
MUST be positioned vertically, with the Power Blade Battery Packs entering from the
top and will not function if positioned in any other direction. For complete details
and instructions, please reference the Power Blade Charger Users Guide that is
shipped with each unit. This manual is also available on request.
Power Inverter
Hours Minutes
3 40
3 25
3 5
2 45
2 35
2 12
2 0
1 55
1 51
1 42
1 30
Optional for Electronic Locking
Drawer System
Cat5 Cable from
Controller Board
NOTE: Listed are the
estimated runtimes for a
single JACO Power Blade
Battery Pack.
24