Jaco EVO User Manual page 21

the Power System Inverter/Charger. Disconnect the DC Cable shown below and
identified as item 7 on page 15. Wait one minute before reconnecting making sure
the connector snaps into position.
 Plug the JACO Mobile Cart power cord into a known good AC wall outlet.
- Does the front status LEDs panel turn on?
- Does the JACO Power Inverter fan turn on?
- Does the PC and LCD power on?
If yes to all above, no need to continue. If not, go to next step.
6 – Check the battery fuse located on each battery pack as shown below.
 Remove the battery bay rear covers, 2 Philips head screw per cover, and slide the
Lithium Iron Phosphate battery out of the holder enough to allow access to the fuse
as shown below.
Remove the fuse and review for possible break. You will be able to see if the internal
connection is still in place or if it has disconnected. If you have a dual battery system, check
both fuses.
20