Table of Contents
Advertisement
F u l l s i z e C P U C a r d
²
²
²
²
²
Chapter3 Award BIOS Setup
Onboard Audio/LAN 1/LAN 2
The default setting for this item is "Enabled". If
you don't utilize onboard LAN / Audio funciton,
just configure it as "Disabled" without any efforts
on jumper setting.
The choices: Disabled, Enabled.
Init Display First
You can select Onboard/AGP or PCI slot to
initialize it as the primary display before initializing
any other display device on the system.
The choices: Onboard/AGP, PCI Slot,
IDE HDD Block Mode
Block mode is also called "block transfer",
"multiple commands", or "multiple sector
read/write". If your IDE hard drive supports
block mode (most new drives do), please select
"Enabled" for automatic detection of the optimal
number of block read/writes per sector the drive
can support.
The choices: Disabled, Enabled.
Power on Function
Despite the power on switch, all the devices listed
below could be defined as power on methods.
The choices: Any key, Button only, Keyboard 98,
Password, Hot key, Mouse move, Mouse click.
KB Power On Password
If you select Password in the above power on
function, you have to press Enter here to set the
S B C - 8 6 0
3 - 21
Advertisement
Table of Contents
