Table of Contents
Advertisement
F u l l s i z e C P U C a r d
²
²
²
Chapter3 Award BIOS Setup
the onboard IDE interface supports. Modes 0
through 4 provide successively increased
performance. In Auto mode, the system
automatically chooses the best mode for each
device.
The choices: Auto, Mode 0, Mode 1, Mode 2,
Mode 3, Mode 4.
IDE Primary or Secondary Master/Slave UDMA
Ultra DMA100 implementation is possible only if
your IDE hard drive supports it and the operating
environment includes a DMA driver. If both your
hard drive and IDE cable support Ultra DMA 100
select Auto to enable BIOS support.
The choices: Auto, Disabled.
USB/ USB 2.0 Controller
USB controller: This function is used to
enable/disable onboard USB controller
USB 2.0 controller: This function is used to
enable/disable high speed USB 2.0 device
The choices: Disabled, Enabled.
USB Keyboard/Mouse Support
Select Enabled when you use a Universal Serial
Bus (USB) keyboard/Mouse under DOS mode.
The choices: Disabled, Enabled.
S B C - 8 6 0
3 - 20
Advertisement
Table of Contents
