Top Cowl Removal And Installation; Battery Inspection - Mercury Jet 20 Manual

oh
goh43
1
ohf2

Top Cowl Removal And Installation

REMOVAL
1
Unlock the rear latch by pushing lever down.
2
Lift rear of cowl and disengage front hook.
INSTALLATION
Engage the front hook and push cowl back over the cowl seal.
Push cowl down and move the rear latch lever up to lock.
ohn1

Battery Inspection

The battery should be inspected at periodic intervals to ensure proper engine
starting capability.
IMPORTANT: Read
accompany your battery.
1. Turn off the engine before servicing the battery.
2. Add water as necessary to keep the battery full.
3. Make sure the battery is secure against movement.
4. Battery cable terminals should be clean, tight, and correctly installed. Positive
to positive and negative to negative.
5. Make sure the battery is equipped with a nonconductive shield to prevent
accidental shorting of battery terminals.
MAINTENANCE
the safety and
69
2
maintenance instructions which