FG Modellsport Leopard 4 Competition Mounting Instructions page 14

Alum. chassis
Disk
Ø4,3
Screw Screw
4,2x13 4,2x13
Adjustable body
mount
Screw
2,9x9,5
O-ring
Ø6x3
Body clip
Hint: Cover the bottom part of the receiver box with some foam in order to protect the
receiver against vibrations.
Before you start mounting the remote control components, please
also thoroughly read the enclosed RC manual and deal with trans-
mitter, receiver and servos. Charge the receiver and transmitter bat-
teries and check the parts on their function.
All metric screws need to be secured with thread lock fluid.
Position 26
Parts are in
bag L
Alum. servo
mount
Screw
M3x16
Disk Ø3,2
Steering servo
Screw
4,2x16
Screw
M4x10 Screw
M4x10
Screw
4,2x16
1. Mount the adjustable body mounts on the alum. chassis
using 4,2x16 countersunk screws. Mount 2,9x9,5 pan head
screws in the second boring from the top of the adjustable
body mounts, press the o-rings Ø6x3 on and secure the
alum. battery holding brace with body clips.
Position 27
Parts are in
bag L
Alum. bat-
tery holding
brace
Throttle/brake
servo
Steering servo
Brake
servo
ABS splash
guard
Screw
4,2x16
Position 28
Parts are in
bag L
2. Mount distance bolts Ø8x28mm to the right ABS
splash guard using 4,2x13 pan head screws and
disks Ø4,3 as shown in position 26.
3. Fix the small plastic servo mount to the alum.
chassis using 4,2x16 countersunk screws. Mount
the throttle/brake servo and brake servo into the
small plastic servo mounts using the enclosed
fixing rubber bushings and screws as shown in
position 26.
4. Fix the alum. servo mount to the alum. chassis
using M4x10 countersunk screws. Mount the stee-
ring servos into the alum. servo mounts using the
enclosed fixing rubber bushings, M3x16 pan head
screws and disks Ø3,2 as shown in position 26.
5. Assemble the receiver battery to the alum. bat-
tery brace using insulating tape as illustrated in
position 27.
6. Fix the aerial mount at the top part of the recei-
ver box using a 2,9x19 pan head screw as shown
in position 28. Press the aerial tubing into the aerial
mount and clamp it using a 2,9x9,5 pan head
screw.
7. Press the bottom part of the receiver box on the
distance bolts Ø8x28mm. Connect the servo cable,
battery cable a.s.o. to the receiver and check on
function.
8. To lead the cables through you have to drill a
hole of approx. Ø8mm at a suitable place of the
receiver box top.
9. Store receiver and the rest of the cables in the
receiver box, push thew aerial cable of the receiver
into the aerial tubing.
10. Place an o-ring between the receiver box bot-
tom and receiver box top for sealing.
11. Screw the receiver box on the distance bolts
Ø8x28mm using 4,2x16 pan head screws.
Receiver box
Due to the constricted space
conditions we recommend to
use the FG Mini Racing pack
06543/01 for the receiver/
servo power supply. Additio-
nally the FG receiver cable
Item N°. 06547/02 or FG recei-
ver cable with switch FG/JR
Item N°. 06551 is required.
Screw
4,2x16