Convenient Functions - SMC Networks ZSE20 Manual

ZSE20(F)/ISE20
Series
Other Sub Screen Display
Peak value or bottom value; or both values can be displayed in one screen!
∗
Peak and bottom values are maintained even if the power supply is cut.
Peak value Bottom value
Label Peak Label
(Peak) value (Bottom)

Convenient Functions

Secret code setting function
The key locking function keeps unauthorised
persons from tampering with buttons.
Power saving function
Power consumption is reduced by turning off the monitor.
(Reduce power consumption by approx. 60 %.)
Compact & Lightweight
Compact: 17.5 mm shorter
Lightweight: 21 g lighter
13 g lighter
3
Peak/Bottom value
Bottom Peak
value value
Resolution switch function
It reduces the monitor to fl icker.
1/1000
(Accuracy is not changed, only the displayed values.)
(When M5 female thread is used.)
(When M5 female thread is used.)
(When R 1/8 is used.)
New New
ZSE20(F)/ISE20
ZSE30A(F)/ISE30A
Output mode/Output type display
Hysteresis mode
Normal output
Rated range display
Vacuum pressure range Compound pressure range
Bottom
value
kPa
∗ Combination of the displays shown above and the set values can be displayed
on the sub screens on both sides.
1/100
17.5
M5 Female thread
M5 Female thread
Window comparator mode
Reversed output Normal output
Positive pressure range
Pressure unit display
MPa psi
MPa/kPa switch function
Vacuum, compound and/or positive pressure can
be displayed in MPa or kPa.
mm
Reversed output
Level bar
display
bar