This guide contains all the information you need to get your SureCall Flex 2Go booster system up and running.
Page 3
50dB booster with auto shutdown CM-FLEX2GO Magnetic mount antenna – CM200 Patch antenna with 12’ cord – CM110W DC car charger (18’cord) – for vehicle use Velcro and screw-mounting kit ® Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 3 All rights reserved.
INTRODUCTION Flex 2Go Booster Hardware The following figure shows the key hardware components on the Model CM-FLEX2GO cellular booster. Refer to this figure as you install your SureCall Flex 2Go. Outdoor Antenna Connector (not shown) Alert Alert Cellular-800 Dial PCS-...
For optimum performance, select a location for your booster that: Is under the seat of the vehicle, for example. Is away from excessive heat, direct sunlight, or moisture. Has proper ventilation. Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 5 All rights reserved.
Page 6
Mount the inside antenna so it is: Within 2-3 feet of the cell phone for best results. Mounted on a surface that is at least 4” (10 cm) away from metal. Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 6...
Page 7
The Power LED goes ON to show that the booster is ready for use (see page 4). If the Power LED does not go ON, be sure the DC outlet and adapter are working. Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 7 All rights reserved.
Page 8
WARNING. The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the booster and/or cause personal injury. Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 8 All rights reserved.
Component Prod No. Descritpion Gain/Loss Notes Outdoor Antenna CM288W 3dBi CM240 Cable, CM004-40FN -3.9dB at cellular outdoor side. 40Feet band -6.0dB at PCS band Right Angle Antenna CM120 3dBi Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 9 All rights reserved.
Page 10
Be sure the power source is not controlled by a switch that can remove power from the outlet. Check the green POWER LED on the booster. If it is OFF, return the power supply to SureCall. Contact tech support at 1-888-365-6283 to receive a Return Merchandise Authorization (RMA), email support@surecall.com, or go to...
Page 11
Use the recommended 6-10 ft. of antenna separation: • 50dB 30-40 ft. separation • 45dB 20-30 ft. separation • 40dB 10-20 ft. separation • 35dB 10 ft. separation Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 11 All rights reserved.
Page 12
For a list of Frequently Asked Questions and a comprehensive, up-to-date Troubleshooting Guide, please visit our website at: www.surecall.com You can also consult a SureCall technical specialist directly by emailing us at or call us at 1-888365-6283. support@surecall.com Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc.
Cable: RG58 RF Connectors: FME Male (both ends) or N Power Consumption: <10W Dimensions: 7” x5” x 1” Weight: 1 lb 11 oz FCC ID (USA): RSNFLEX2GO Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 13 All rights reserved.
FCC or a licensed wireless service provider. WARNING: E911 location information may not be provided or may be inaccurate for calls served BY USING THIS DEVICE. Flex 2G Kit for vehicles (CM-FLEX2GO) SureCall, Inc. Page 14 All rights reserved.
The limit of liability under this warranty is, at SureCall, Inc.’s option, to repair or replace any product or part thereof which shall within TWO YEARS of purchase as determined by examination by SureCall, Inc., prove defective in material and/or...
Page 16
Fax: 510.996.7250 www.surecall.com SureCall has made a good faith effort to ensure the accuracy of the information in this document and disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties, except as may be stated in its written agreement with and for its customers.
Need help?
Do you have a question about the CM-FLEX2GO and is the answer not in the manual?
Questions and answers