Tray Specifications - Welbilt Frymaster UHCTHD Service Manual

Section 2
The numbers on the display are associated with the
locations of the cabinet. They will be highlighted in green
and the product timer will start.
Press & Go Screen with Active Timers
The green portion of the tray timer represents the
remaining time. Each menu item has a programmed
warning time. When the warning time is reached the
elapsed time will fill in with yellow and the alarm will beep.
Timer Reaches the Warning Time
Each menu item has a programmed hold time. When the
timer expires, the corresponding tray timer will turn red,
the alarm will beep and DISCARD! is displayed.
Product Hold Timer Expires
The alarm will beep for 10 seconds. The timer displays time
the product is being held past the programmed hold time.
Tray and food should be removed. Reset the expired tray
timer by selecting it.
When necessary to cancel or reset a timer before the hold
time has expired, select a tray timer to reset. The question
Reset? will pop up Select the green check to reset. Select
the red X to resume.
Reset Pop Up

TRAY SPECIFICATIONS

Use First For Identical Products
When two identical products are active, the one with the
least time remaining will be highlighted in green, the others
in gray. There is no change is countdown or timer behavior.
When the first item is canceled or reset, the next one in
order will turn green.
Use Highlighted Tray First
False Bottom Requirements
• No line below the product name means no false
bottom or wire racks are used in the tray.
• A dashed line below the product name means a wire
rack or a false bottom is used in the tray.
A Group in the Menu
A product in the menu is part of a group if there are
dots underneath it. Swipe a product with dots to choose
another item from the group.
Operation
2-3