Infineon I2C Read Ext Device 1 Manual page 7

Implementation
2
Configuring the I C device
The function IfxI2c_I2c_initDeviceConfig() initializes an instance of the
structure IfxI2c_I2c_deviceConfig with its default values.
Afterwards, the 7-bit slave address can be set through the parameter
deviceAddress.
2
The function IfxI2c_I2c_initDevice() finalizes the I C initialization by connecting
2
the device configuration with the preconfigured I C module.
The functions above are provided by the iLLD header IfxI2c_I2c.h.
7
2019-10-17 Copyright © Infineon Technologies AG 2019. All rights reserved.