Related Manuals for Rittal CMC III DCM
Summary of Contents for Rittal CMC III DCM
- Page 1 CMC III Door Control Module CMC III door control module 7030.500 Montage-, Installations- und Bedienungsanleitung Assembly and operating instructions...
- Page 2 Rittal GmbH & Co. KG Auf dem Stützelberg 35745 Herborn Germany Tel.: +49(0)2772 505-0 Fax: +49(0)2772 505-2319 E-mail: info@rittal.com www.rittal.com www.rittal.de We are always happy to answer any technical questions regarding our entire range of products. Rittal CMC III door control module...
-
Page 3: Table Of Contents
CMC III Processing Unit ......15 Operating via the CMC III Processing Unit website ............15 6.6.1 Device ..............15 6.6.2 Temperature ............15 6.6.3 Door Opening ............. 16 Testing the settings........18 6.7.1 KeyPad .............. 18 Rittal CMC III door control module... -
Page 4: Notes On Documentation
This documentation shows the English screenshots. The descriptions of individual parameters on the Rittal GmbH & Co. KG hereby confirms that the door CMC III PU website likewise use English terminology. control module is compliant with the EC EMC Directive Depending on the set language, the displays on the 2004/108/EC. -
Page 5: Safety Instructions
(e.g. ating and safety regulations. after adequately lowering the temperature inside the – Use only original Rittal products or products recom- TS IT rack). mended by Rittal in conjunction with the door control –... -
Page 6: Product Description
Rittal GmbH & Co. KG is not liable for any damage which may result from failure to comply with the documenta- tion provided. The same applies to failure to comply with the valid documentation for any accessories used. -
Page 7: Transport And Handling
Check the unit for any damage that may have oc- curred during transport. Note: Damage and other faults, e.g. incomplete de- livery, should be reported immediately, in writing, to the shipping company and to Rittal GmbH & Co. KG. Remove the unit from the PE film. ... -
Page 8: Installation
IT enclosure: 1. Installation using the mounting clips provided, pos- sibly also with spring clips for top-hat rail installation. 2. Installation with the CMC III mounting unit (7030.071). Rittal CMC III door control module... -
Page 9: Installation With The Cmc Iii Mounting Unit
Fig. 6: Fastening the mounting unit to a mounting plate Fasten the mounting unit (7030.070) in a free rack- mounting point (1 U) in the IT enclosure using the screws provided. Rittal CMC III door control module... -
Page 10: Installation On A Top-Hat Rail
(magnet door kit, door switch or door comfort handle, CMC III reader unit and door kit extension) have been correctly mechanically fitted on the TS IT rack as per the corresponding assembly instructions. Rittal CMC III door control module... -
Page 11: Connecting The Magnet Door Kit
Magnet door kit (7030.240, 7030.241 or 7030.250) for door 2 (front door) Depending on the door type, connect the relevant magnet door kit to the front door (fig. 9, item 7) and the rear door (fig. 9, item 8). Rittal CMC III door control module... -
Page 12: Optional Add-On Components
Power supply unit (7030.060) for operating the spindles – 7030.490 (length 4 m) Door kit extension (7030.261) for front door – 7030.094 (length 5 m) Door kit extension (7030.261) for rear door – 7030.095 (length 10 m) Rittal CMC III door control module... - Page 13 See section 6.3.1 "Multi-LED displays" for a list of all of the multi-LED displays. Status change display on the CAN bus LEDs – Continuous green LEDs: CAN bus status "OK". – Continuous red LEDs: CAN bus status defective. Rittal CMC III door control module...
-
Page 14: Operation
CAN bus connection, 24 V with the left mouse button in the context menu. CAN bus connection, 24 V If an alarm message has been selected, "Acknowl- edge Alarm" only confirms the currently selected message. Rittal CMC III door control module... -
Page 15: Operation Of The Door Control Module Without A Cmc Iii Processing Unit
Alarm alarm message when exceeded. First select the "CMCIII-DCM" entry in the navigation SetPtHigh- Upper temperature limit which triggers a area. Warning warning message when exceeded. Tab. 4: Settings at "Temperature" level Rittal CMC III door control module... -
Page 16: Door Opening
"Unlock": Activation of door opening (de- tasks. activation of the magnet door kit and acti- vation of the door kit extension). Tab. 8: Settings at "Input Alarm" level Rittal CMC III door control module... - Page 17 (depending at this level or the sub-level "Input Access Rear", analo- on the actual components connected and gous to the "Manual Front" level. activated on the website). Rittal CMC III door control module...
-
Page 18: Testing The Settings
The following parameter is also displayed for the combi- extension) are activated. If a component is not connect- nation lock/transponder reader: ed to the front door, the corresponding entry must be deactivated here in order to avoid malfunctions and mis- configurations. Rittal CMC III door control module... -
Page 19: Rittal Cmc Iii Door Control Module
Configuration tab after se- lecting the "Processing Unit" component in the naviga- tion area. The exact procedure is described in the as- sembly, installation and operating instructions of the respective reader unit (combination lock or transponder reader). Rittal CMC III door control module... -
Page 20: Maintenance
In particular, please test all stored alarms for opening the doors separately. For activating the alarm via a smoke detector: Perform the test using a suitable test gas. Rittal CMC III door control module... -
Page 21: Storage And Disposal
8 Storage and disposal Storage and disposal Storage If the device is not used for a long period, Rittal recom- mends that it be disconnected from the mains power supply and protected from damp and dust. Disposal Since the door control module consists mainly of the "housing"... -
Page 22: Technical Specifications
Operating humidity range 5%...95% relative humidity, non-condensing Protection category IP 30 to IEC 60 529 Number of CAN bus connections Number of connections for components Operation/signals LED display OK/Warning/Alarm/CAN bus status Tab. 20: Technical specifications Rittal CMC III door control module... -
Page 23: Customer Service Addresses
10 Customer service addresses Customer service addresses For technical queries, please contact: Tel.: +49(0)2772 505-9052 E-mail: info@rittal.de Homepage: www.rittal.com For complaints or service requests, please contact: Tel.: +49(0)2772 505-1855 E-mail: service@rittal.de Rittal CMC III door control module... - Page 24 Enclosures Power Distribution Climate Control IT Infrastructure Software & Services RITTAL GmbH & Co. KG Postfach 1662 · D-35726 Herborn Phone +49(0)2772 505-0 · Fax +49(0)2772 505-2319 E-mail: info@rittal.de · www.rittal.com...
Need help?
Do you have a question about the CMC III DCM and is the answer not in the manual?
Questions and answers