Table of Contents
Advertisement
LINE SHARE 120H
1. Telephone (Wall) Jack (If you are
using Caller ID, connect the Caller ID
unit to this jack, then connect the
Line Share 120H to the Caller ID.)
3. Answering
Machine (set
to answer on 2
or 3 rings)
Figure 3-3. Single Phone Line/Single Phone Arrangement.
1. Plug the RJ-11 end of a telephone line cord into the LINE-IN port on the
back of the Line Share 120H. Plug the other end of the telephone line
cord into the telephone (wall) jack.
2. Plug the small end of the AC power cord provided with the Line Share
120H into the power input port labeled "12 VAC" on the back of the Line
Share 120H. Plug the adapter into a standard AC outlet.
The green LED lights when power is applied and remains lit, indicating
its ON status.
3. To connect an answering machine, plug the RJ-11 end of a telephone line
cord into the TAD port on the Line Share 120H.
4. To connect a phone, plug the RJ-11 end of a telephone line cord into the
PHONE port on the Line Share 120H.
14
1
2
3
LINE-IN
TAD
PHONE
MODEM
4. Telephone
4
FAX/
12VAC
5. Fax Machine/Fax
Modem Card (set to
answer on 1 ring)
2. Power
Supply
NOTE: All
peripheral
equipment
must be
connected to
the proper
power source.
Option
6. Computer with
Modem card (set
to answer on 1
ring)
Advertisement
Table of Contents
