Table of Contents
Advertisement
5. To connect a fax machine, plug the RJ-11 end of a telephone line cord
into the FAX/MODEM port on the Line Share 120H.
Set your fax to answer on 1 ring.
6. To connect a telephone device such as a computer modem, in lieu of a
fax machine, plug the RJ-11 end of a telephone line cord into the
FAX/MODEM port on the Line Share 120H.
Set the modem to answer on 1 ring.
The Line Share 120H has an automatic TAD Transfer feature (see Section
4.4 for more information on the TAD port). To disable this feature,
connect your answering machine to the PHONE port of the Line Share
120H and connect your phone to the answering machine.
Connect this line cord to the port
labeled "Telephone Set" on the
answering machine.
Figure 3-4. Configuration for TAD Transfer Feature Disabled.
NOTE
1
2
3
4
FAX/
LINE-IN
TAD
PHONE
MODEM
Connect this line cord to the port
labeled "Telephone Line" on the
answering machine.
CHAPTER 3: Installation
12VAC
15
Advertisement
Table of Contents
