Port Adapter Removal And Installation - Cisco PA-E3 Series Installation And Configuration Manual

Port Adapter Removal and Installation

When performing the following procedures, wear a grounding wrist strap to avoid ESD damage to the
Warning
card. Some platforms have an ESD connector for attaching the wrist strap. Do not directly touch the
midplane or backplane with your hand or any metal tool, or you could shock yourself.
Port Adapter Removal and Installation
In this section, the illustrations that follow give step-by-step instructions on how to remove and install
port adapters. This section contains the following illustrations:
•
•
•
•
•
•
•
•
•
•
•
PA-E3 Serial Port Adapter Installation and Configuration
3-4
Catalyst RSM/VIP2-Removing and Installing a Port Adapter, page 3-5
Catalyst 6000 Family FlexWAN Module-Removing and Installing a Port Adapter, page 3-6
Cisco 7100 Series Routers-Removing and Installing a Port Adapter, page 3-7
Cisco 7200 Series Routers and Cisco 7200 VXR Routers-Removing and Installing a Port Adapter,
page 3-8
Cisco uBR7200 Series Routers-Removing a Port Adapter, page 3-9
Cisco uBR7200 Series Routers-Installing a Port Adapter, page 3-10
Cisco 7201 Router-Removing and Installing a Port Adapter, page 3-11
Cisco 7301 Router-Removing and Installing a Port Adapter, page 3-12
Cisco 7304 PCI Port Adapter Carrier Card-Removing and Installing a Port Adapter, page 3-13
Cisco 7401ASR Router-Removing and Installing a Port Adapter, page 3-15
VIP-Removing and Installing a Port Adapter, page 3-16
Chapter 3 Removing and Installing Port Adapters
OL-3502-04