Advertisement
Quick Links
BARNSTORMER, GREEN BREEZE,
EZ-BREEZE, AND HIGH OUTPUT
DELUXE BASKET FAN
WARRANTY
J&D Manufacturing warrants all products are free from defects in materials
and workmanship under normal use for the period of one year from date of
purchase. Our warranty does not cover normal or regular wear and tear.
J&D Manufacturing can repair or replace at our option, any product or part
of the product that is found to be defective. Our warranty applies to
materials only, and does not include return freight, delivery, loss or damage
to personal property, cost of removal or installation, any incidental or
consequential damages or labor. This warranty does not apply to products
which are misused, abused, altered, improperly installed or subject to
negligence. All warranties must be approved through our warranty
department. The original purchaser must present a copy of the invoice for
the defective product. One year is our standard warranty unless specified
on our literature or in the installation instructions or user manuals.
RECOMMENDED TOOLS FOR ASSEMBLY (NOT PROVIDED)
Combination Wrenches
Socket Wrench
7/16" & 9/16"
Measuring Tape
7/16" & 9/16" Sockets
IS123-11I
Safety Glasses
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
INCLUDED ASSEMBLY HARDWARE - TO SCALE
(2) 3/8"
Flat Washer
(1) 3/8" x 1-1/4"
Hex Bolt
Green Breeze and EZ-Breeze models include additional mounting hardware.
See page 4 for further information and instructions.
PARTS LEGEND
Capacitor
INSTALLATION
Please read over all instructions carefully before you
begin. If you have any questions please call your local
dealer, or contact J&D Manufacturing at 1-800-998-2398.
(2) 1/4"
Flat Washer
(1) 1/4" x 1"
Hex Bolt
(1) 3/8"
Nylock Nut
Nylock Nut
Bracket
Flag
Motor
Flag
(1) 1/4"
Page 1 of 4
Advertisement
Related Manuals for J&D MAnufacturing BARNSTORMER
Summary of Contents for J&D MAnufacturing BARNSTORMER
- Page 1 BARNSTORMER, GREEN BREEZE, INCLUDED ASSEMBLY HARDWARE - TO SCALE EZ-BREEZE, AND HIGH OUTPUT DELUXE BASKET FAN (2) 1/4" Flat Washer (2) 3/8" Flat Washer (1) 1/4" x 1" Hex Bolt (1) 3/8" x 1-1/4" (1) 1/4" (1) 3/8" Hex Bolt...
- Page 2 It is important to select a proper location when mounting your circulation Attach fan to bracket. Insert bracket flag in between the motor flags and fan. You must provide a minimum of 5’ unrestricted air flow on the back secure using the center holes on the motor flags with (1) 3/8” x 1-1/4 hex side of the fan.
- Page 3 ADDITIONAL CLARIFICATIONS AND WARNINGS Do NOT operate fan with the motor mounted at an angle larger than 60º Do NOT mount fan with capacitor on the bottom. This can cause moisture from horizontal. This will void the warranty. to build up in the capacitor cap and short out the capacitor. Mounting the fan this way will void the warranty.
-
Page 4: Maintenance Instructions
PROVIDING POWER TO FAN ADDITIONAL INCLUDED HARDWARE FOR THE GREEN BREEZE AND EZ-BREEZE FANS - TO SCALE Instructions for corded models • Provide a grounded outlet that meets or exceeds the load capability for your fan. (2) 5/16” x 2-1/2”ID Wiring instructions for non corded models U-Bolt •...