Testing The Installation; Sunvts - Sun Microsystems StorageTek PCI-X Enterprise Installation Manual

System Recognition of the Host Adapter, Method A, Part 2
CODE EXAMPLE 2
ok apply show-children /pci@e,2000/pci@2/SUNW,qlc@5
LiD HA --- Port WWN --- ----- ---- Disk description ----
_3d 3d 5080020000025a5a SUN ----- SENA ---------- 1.09PZX
_30 30 21000020370e6891 SEAGATE - ST19171FCSUN9.0G177E9823U86993
_33 33 21000020370e964f SEAGATE - ST19171FCSUN9.0G177E9823V06714
_36 36 21000020370e92c9 SEAGATE - ST19171FCSUN9.0G177E9823V11851
_2d 2d 5080020000025a59 SUN ----- SENA ---------- 1.09PZX
_23 23 21000020370e930d SEAGATE - ST19171FCSUN9.0G177E9823V12050
_26 26 21000020370e9b08 SEAGATE - ST19171FCSUN9.0G177E9823V15713
In
CODE EXAMPLE 2
StorageTek PCI-X Enterprise 2 Gb FC Single Port HBA and the disks are in a Sun
StorEdge A5000 array (SENA).
Note – The probe-scsi-all command does not function identically on all
platforms, and does not in all cases probe for fiber channel devices. The
probe-fcal-all command exists only on Sun Enterprise™ systems.
9. Reboot your system using the boot -r command.

Testing the Installation

SunVTS

Refer to the SunVTS documents in TABLE 1-4.
Sun VTS Documents
TABLE 1
Application
Diagnostic Testing
, /pci@e,0/pci@1/pc1@1/SUNW,qlc@5 is one port on the Sun
Title
SunVTS 4.5 User's Guide
SunVTS 4.5 Test Reference
SunVTS 4.3 User's Guide
SunVTS 4.3 Test Reference
Installing, Connecting, and Testing the Host Bus Adapter
Part Number
*
816-1575
816-1576
\
806-7705
806-7704
11