Table of Contents
Advertisement
▼
To Copy the Contents of Non-root File Systems onto the
New Boot Disk
1. Mount the file system onto the /mnt mount point.
This example shows the copying of the /home file system from slice 7 to the new
boot disk.
# mount /dev/dsk/c7t16d0 /mnt
2. Use the ufsdump(1M) and ufsrestore(1M) commands to copy the contents of
the file system from the temporary boot disk to the new boot disk.
# ufsdump 0f - /dev/rdsk/c0t0d0s0 | ( cd /mnt; ufsrestore rf -)
DUMP: Writing 32 Kilobyte records
DUMP: Date of this level 0 dump: Tue 19 Feb 2002 02:44:35 PM PST
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rdsk/c7t16d0s0 (hba2-81:/) to standard
output.
DUMP: Mapping (Pass I) [regular files]
DUMP: Mapping (Pass II) [directories]
DUMP: Estimated 1818082 blocks (887.74MB).
DUMP: Dumping (Pass III) [directories]
DUMP: Dumping (Pass IV) [regular files]
Warning: ./lost+found: File exists
DUMP: 88.77% done, finished in 0:01
DUMP: 1818046 blocks (887.72MB) on 1 volume at 1363 KB/sec
DUMP: DUMP IS DONE
#
3. Unmount the file system from the /mnt mount point.
# umount /mnt
4. Repeat
Step 1
through
contents to the new boot disk. When finished, go to
on page
32.
Step 3
as needed until you have copied all the file systems'
Installing, Connecting, and Testing the Host Bus Adapter
"To Update the vfstab File"
33
Advertisement
Table of Contents
