Table of Contents
Advertisement
Installing the Host Adapter
1. Pull the two dust covers out of the 2x5 optical transceiver (OT) connectors
(
FIGURE 3
FIGURE 3
2. Install the host adapter in the PCI slot you have chosen.
Installation details vary for each system. Refer to your system documentation for
specific instructions.
3. Reassemble the system.
Refer to your system documentation for specific instructions.
4. Disconnect the wrist strap.
5. Push the fiber optic cable connector into the OT connector until you hear a click.
8
Sun StorageTek PCI-X Enterprise 2 Gb FC Single Port Host Bus Adapter Installation Guide • January 2007
).
Sun StorageTek PCI-X Enterprise 2 Gb FC Single Port HBA (Dust Covers
Removed)
Advertisement
Table of Contents
