Signal Strength Information; Aux Setup; Turning Aux On/Off - Alpine INE-W970HD Owner's Manual

Changing the Lock Passcode
1
Touch [Edit Code].
The numeric keypad screen is displayed.
2
Enter a 4-digit passcode.
The initial passcode is set to 0000.
• Touch [<-] to delete an entered number.
• Touch [Delete All] to delete all entered numbers.
3
Touch [Done] to confirm the entry.
4
Now use the keypad to enter the new 4-digit
passcode.
5
Touch [Done].
6
Then use the keypad to enter the new 4-digit
passcode a second time to verify it.
7
Touch [Done].
• Remember to keep a note of the passcode in a safe place in case
you forget the code.
• The passcode is reset to '0000' upon restoring factory default
settings.

Signal Strength Information

While listening to a SiriusXM Channel, the Signal strength of the
current channel will be displayed.
This menu item displays the SiriusXM signal strength as
Strong, Good, Weak or No Signal.
• If the Signal Indicator reports Weak or No Signal and your vehicle
is parked outside with no obstructions to the southern sky, then
your SiriusXM antenna may not be properly installed or may have
become damaged.

AUX Setup

You can set up the items related to the Auxiliary device.
In the Setup screen, touch [AUX].
• These settings cannot be changed when AUX is the current audio
source.
• These settings are only available when "AUX" is set to "On".

Turning AUX On/Off

Check the [Off] box to turn the feature on.
Uncheck the [On] box to turn the feature off.
81
-EN