Setting The Bluetooth Device; Deleting A Bluetooth Device From The List; Auto Answering Setup; Apple Carplay Setup - Alpine iLX-F259E Owner's Manual

9-inch digital media station
Table of Contents

Advertisement

• If a 6 character Passkey appears on this device, make sure the same
passkey is displayed on the Bluetooth compatible device and touch
[OK].
• If all 5 devices have been registered, you cannot register a 6th device. To
register another device, you need to delete one of the other 5 devices
first.

Setting the Bluetooth Device

Select one of 5 paired Bluetooth compatible devices that you previously
registered.
Touch [
] (Audio) or [
] (Hands-free) of the device you
want to connect from the Paired Device list.
• You can also change the connected device by touching the device name.

Deleting a Bluetooth Device from the list

You can delete the information of a previously connected Bluetooth
compatible device.
1
Touch [ ] of the Bluetooth compatible device to delete
from the Paired Device list.
2
Touch [Yes].
• Touching [No] will cancel the setting.
Setting the Auto Connection
You can connect the last connected device automatically.
Set "Auto Connect" to [On] (

Auto Answering Setup

You can set to answer an incoming call automatically.
Touch [
] (Off) or [
] (On) of "Auto Answer Bluetooth
Incoming Call".

Apple CarPlay Setup

To use the Apple CarPlay (page 22), set "Apple CarPlay" to [On].
Touch [
] (Off) or [
).
] (On) of "Apple CarPlay".

Camera Setup

[Camera] is selected on the Setup Menu screen.
You can set up items related to the Camera.
Camera Setup Menu screen
Setting items:
Camera Select (page 15)
Camera Signal (page 15)
Parking Guide Adjust (page 16)
Visual Adjust (page 16)
Camera Interrupt (DISPLAY OFF Mode) (page 16)
Mute While Backing Up (page 16)

Camera Input Setting

[Camera Select] is selected on the Camera Setup Menu screen.
Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Rear
Off:
No camera is connected.
Rear:
Rear camera is connected.

Camera Signal Input Setting

[Camera Signal] is selected on the Camera Setup Menu screen.
When the camera is connected, the video input signal type can be
chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
15
-EN

Advertisement

Table of Contents
loading

Table of Contents