Table of Contents
Advertisement
Reverse Camera Signal Input Setting
When "Reverse Camera (Camera 1)" setting is [On], the
video input signal type can be chosen.
Setting item:
Reverse Camera Signal
Setting contents:
NTSC (Initial setting)/PAL
Camera 2 Setup
Set how the second camera is used.
Setting item:
Camera 2 Setup
Setting contents:
Off (Initial setting) / Front / Side / Other
• "Camera 2 Setup" is not available when the Camera Setup
screen is displayed using [Setup] of the Camera screen.
Camera 2 Signal Input Setting
When "Camera 2 Setup" setting is [On], the video input
signal type can be chosen.
Setting item:
Camera 2 Signal
Setting contents:
NTSC (Initial setting)/PAL
Camera Guide Setup
You can adjust the camera guide position.
Setting item:
Camera Guide Setup
1
Touch [Camera Guide Setup] on the Camera
Setup menu screen.
The camera guide adjustment screen is displayed.
2
Touch [Camera], and then touch a camera,
[Rear], [Front] or [Side], to adjust.
• The guide line of the Other Camera cannot be adjusted.
■
Rear Camera screen example
22
-EN
ALPINE iLX-F509E 68-41657Z84-A (EN)
■
Front Camera screen example
■
Side Camera screen example
• When adjusting the side camera, touch [View], and then
[
] (Left steering) or [
guide line adjustment that matches the position of the steering
wheel in your vehicle.
3
Select a guide to adjust by touching [
4
Touch [
], [
], [
] or [
position of the guide.
5
Touch [Back] or [Close] to complete the
adjustment.
• The setting can be returned to the default setting by touching
[Default].
Hitch Guideline Adjustment
Adjustment can be made only by Rear Camera.
1
Touch [View], and then touch [Hitch].
The Hitch adjustment screen is displayed.
2
touch [
][
]to select the guide to adjust.
3
Touch [
], [
], [
] or [
position of the guide.
] (Right steering) to make the
][
].
] to adjust the
] to adjust the
Advertisement
Table of Contents
