Selecting A Location On The Map; Planning A Multipoint Route - Alpine INE-W970HD Owner's Manual

3.1.8 Selecting a location on the map

To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
2. Tap the location that you want to select as your destination. The cursor (
3. (optional) If needed, tap
Tip!
If you already have a planned route, tap
selected location to your route.
4. Tap
5. The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap

3.1.9 Planning a Multipoint Route

To build your route destination-by-destination, perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
to list the Places near the selected point or to save this location.
to select the cursor as the destination.
to start your journey.
and
to modify the route parameters, or tap
48
) appears there.
to add the