4.
Select a route and the Multipoint Route screen appears. If necessary, modify the saved route.
Otherwise, tap
5.
The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap
3.1.7 Entering coordinates
To select a destination by entering its coordinates, perform the following steps:
1.
Tap
on the Navigation view to access the Navigation menu.
2.
Tap
and
3.
You can enter the latitude and longitude values in any of the following formats: decimal degrees,
degrees and decimal minutes, or degrees, minutes and decimal seconds. Tap
.
to start your journey.
.
to modify the route parameters, or tap
46
.