Getting Started; Location Of Controls - Alpine INE-W970HD Owner's Manual

Getting Started

Location of Controls

The screen design used in the Owner's Manual may differ from the actual screen.
■ For INE-W970HD
①
②
③
④
⑤
⑥
Sound Settings or Eject button
〇①〇
Displays the [Tone/Fader/Balance] settings screen.
Press and hold this button to eject Disc.
〇②〇 or VOICE button
Depending on the connected smartphone, press to activate
Siri function or voice recognition mode. (Only works for Apple
CarPlay and Android Auto.)
(NAV) button
〇③〇
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to
Go Home route screen. (If Home is not set yet, it will change to
the Home setting screen.)
For details of navigation operations, refer to "Navigation System
OM (Owner's Manual)".
Recalls the connected smartphone's map screen.
Depending on the smartphone, this function may not be available.
ALL MENUS or (Power Off) button
〇④〇
Recalls the All Menus screen.
Press and hold this button for at least 2 seconds to turn the power off.
Turning Power On/Off
Some of this unit's functions cannot be performed while the is vehicle is in motion. Be sure to stop your vehicle in a safe location and apply the
parking brake then release and apply and keep applied before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
6
-EN
ALPINE_QRG_AM_ENG_191027.indd 6
Owner's manual
⑦ ⑧
〇⑤〇
〇⑥〇 + / − button
〇⑦〇 Remote Sensor
〇⑧〇 Disc insert slot
〇⑨〇 RESET switch
2
Getting Started
⑨
(AUDIO) or (MUTE) button
Displays the Audio/Visual screen.
When pressed and held, mutes the volume.
Press to adjust the volume.
Point the remote control transmitter towards the remote sensor
within a range of 2 metres.
Inserts/ejects discs
The system of this unit is reset.
Press and hold the All Menus/ (Power Off) button
for more than 2 seconds to turn the power off.
2019-10-27 오후 9:33:37