Searching By Name - Alpine INE-W970HD Owner's Manual

Tap to reorder the list.
9. Browse the list and tap one of the list items. A full screen map appears with the selected point in
the middle. The name and address of the Place is displayed at the top of the screen.
10. The process continues the same way as in case of any other search for Places. See page 36.

3.1.3.3 Searching by name

To search for a Place by name, browse the various Place categories, or use the mixture of the two search
types, perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap and
3. Tap
4. Select the area around which you would like to search for the Place. By default, the search area is
around the current position (or if it is not available, around the last known position). In this case,
the result list is ordered by the distance from this position. Tap
the following search areas:
•
Tap
ordered by the distance from the center of the selected town.)
•
Tap
(The result list is ordered by the distance from the destination.)
•
Tap
This is useful when you search for a later stopover that results in a minimal detour only,
such as searching for upcoming gas stations or restaurants. (The result list is ordered by the
length of the necessary detour.)
.
to open the Search By Name or Category window.
to search for a place within a selected town. (The result list is
to search for a place around the destination of the planned route.
to search along the planned route, and not around a given position.
40
to select one of