Manipulating The Map - Alpine INE-W970HD Owner's Manual

1.2.5 Manipulating the map

If you tap the map anywhere during navigation, the map stops following the current position (the blue
arrow is not locked in a fix position on the screen anymore) and control buttons appear to help you modify
the map view.
You can perform the following actions on the map:
Action
Checking No buttons
location
information
Moving the map No buttons
by dragging
Zooming in and
out
Tilting up and
down
Rotating left and
right
Button(s)
The top section of the Navigation view shows information about
the selected point (the cursor
Move the map in any direction: tap and hold the map and move
your finger towards the direction you want to move the map.
Change how much of the map is displayed on the screen.
Alpine navigation uses maps that let you examine the locations
,
at various zoom levels, always with optimised content. It always
displays street names and other text with the same font size,
never upside-down, and you only see the streets and objects
that you need.
Map scaling has a limit in 3D map view mode. If you zoom out
further, the map switches to 2D view mode.
Tap once to modify the view in a large step, or tap and hold the
button to modify it continuously and smoothly.
Change the vertical view angle of the map in 3D mode.
,
Tap once to modify the view in a large step, or tap and hold the
button to modify it continuously and smoothly.
Changes the horizontal view angle of the map.
Tap once to modify the view in a large step, or tap and hold the
,
button to modify it continuously and smoothly.
Function
10
).