Belling Cookcenter 150 Installation & User's Instructions page 35

Table of Contents

Advertisement

Ceramic Hob
Cooking Exterior
Door Handles
Sealed Hotplate
Griddle
Care and Cleaning
WARNING! If any crack should appear on the hob, isolate the
cooker from the mains supply. Do not use any part of the cooker
but contact your Belling Service Agent.
The ceramic hob is very hard wearing and with normal care should
remain in good condition. However, it is important that any spillage
is dealt with before the hob is used again, otherwise it will become
baked on.
Once the hob has cooled, remove any heavy spillage or soiling with
a metal spatula, palette knife or scraper, then use a little Belling
Ceramic Hob Cleaner & Conditioner on a damp cloth to remove any
marks. Wipe off the residue of the cleaner with a soft damp cloth
and polish the hob with a soft lint-free cloth. It is important that the
hob is cleaned regularly with Belling Ceramic Hob Cleaner &
Conditioner as it provides a protective film to keep the hob in good
condition and assists in keeping the hob clean.
Whilst it is recommended that normal cleaning is carried out when
the hob has cooled, if jam, fruit or anything with a high sugar
content is spilled on the hob, or plastic or aluminium is melted onto
the hob, clean it off immediately, as damage to the hob can result.
Switch off the hob and use a metal spatula, palette knife or scraper
to remove the spillage. TAKE CARE, as the spillage and the hob may
be very hot. When the hob has cooled, clean as usual with Belling
Ceramic Hob Cleaner & Conditioner.
Do not use scouring powders or paste, wire wool scouring pads, or
oven cleaners on the hob as these can cause damage to the hob
surface.
If you require further Belling Ceramic Hob Cleaner & Conditioner
please contact Belling Spares Department on 01709 579907 and
quote part number:
The outside surfaces of your cooker should be cleaned with a mild
detergent or mild cream cleanser and a little water. Wipe off the
detergent with a damp cloth and dry the cooker with a soft lint-free
cloth.
Do not use scouring pads or abrasive detergents, particularly on the
control panel and doors as damage may result.
Clean door handles/trims with warm soapy water only. Do not use
cream or abrasive cleaners.
The cleaning of the sealed hotplate should be done when it is cold,
using a soap filled pad, following the grain of the hotplate.
This will ensure that any stubborn, burnt on spillages are removed.
Wipe over with a damp clean cloth, making sure that all the cleaner
has been removed. Finally, turn on the hotplate to warm for a few
minutes then smear with a little cooking oil, or Belling Sealed
Hotplate Conditioner, to provide a protective coating.
If you require Belling Sealed Plate Conditioner please contact Belling
Spares Department on 01709 579907 and quote part number:
Belling 026
The stainless steel hotplate trim will discolour during normal use and
can be cleaned using a cream cleaner or a stainless steel cleaner.
The cleaning of the griddle should be done when it is cold, using
warm soapy water. DO NOT put in a dishwasher.
Belling 023
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents