LW Scientific Advanced Instruction Manual

LW Scientific Advanced Instruction Manual

Student scopes

Advertisement

A
B
C
Standard
Introduction
LW Scientific is an international manufacturer of quality microscopes and optical equipment. Thank you for your purchase of a Student
Series microscope.
Should you have any questions regarding your new purchase, we have factory-trained technical support staff available to take your call.
Feel free to contact us with any questions or comments you may have.
Your microscope is packaged in form-fitting molded Styrofoam for safe transportation to you. Please inspect the outer
and inner cotnainers for any visual damage. If there is damage, please contact the shipping company to place a claim.
Setup
Remove the microscope from the packing material and set on a stable at surface. Remove any tissue or protective
plastic from the stage, eyepiece, and objectives.
Your microscope should include the following parts:
1-Microscope body
1-10x eyepiece with pointer (Installed)
3-Objectives 4x, 10x, 40x (Installed)
*Models Advanced and Pro will also include a 100x oil objective and a vial of immersion oil.
If any parts are missing, contact your distributor or LW Scientific.
P. 770.270.1394
P. 770.270.1394
Student Scopes
A
D
E
Advanced
1-This Instruction Manual
1-Dust Cover
1-Warranty Card
F. 770.270.2389
F. 770.270.2389
865 Marathon Parkway Lawrenceville GA 30046
A
B
C
Pro
865 Marathon Parkway Lawrenceville GA 30046
Instruction Manual
A
Eyepiece
B
Objectives
C
Stage
D
Coarse Focus
E
Fine Focus
D
E
MKT-7.5.3-L-037 | Rev 0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Advanced and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LW Scientific Advanced

  • Page 1 Advanced Introduction LW Scientific is an international manufacturer of quality microscopes and optical equipment. Thank you for your purchase of a Student Series microscope. Should you have any questions regarding your new purchase, we have factory-trained technical support staff available to take your call.
  • Page 2 Turn the light source on using the on/off switch on the back of the scope. If you have the fluorescent model, it will flicker several times before illuminating. If the light does not come on, first check to ensure that the bulb is properly seated, then call LW Scientific technical support.

This manual is also suitable for:

ProStandard

Table of Contents