Personal Safety - Parkside PLPD 60 A1 Translation Of The Original Instructions

Soldering gun with solder feed
Hide thumbs Also See for PLPD 60 A1:
Table of Contents

Advertisement

Available languages

Available languages

refrigerators. There is an
GB
IE
increased risk of electric
NI
CY
shock if your body is
earthed or grounded.
c) Do not expose power
tools to rain or wet
conditions. Water
entering a power tool
will increase the risk of
electric shock.
d) Do not abuse the cord.
Never use the cord for
carrying, pulling or
unplugging the power
tool. Keep cord away
from heat, oil, sharp
edges or moving parts.
Damaged or entangled
cords increase the risk of
electric shock.
e) When operating a
power tool outdoors,
use an extension cord
suitable for outdoor
use. Use of a cord
suitable for outdoor use
reduces the risk of electric
shock.
4
f) If operating a power
tool in a damp location
is unavoidable, use a
residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
g) Always hold the power
cord away from the
working area of the
appliance and run it to
the rear away from the
appliance.
h) Always pull out the plug
if you leave the appliance
unattended or carry out
work on the appliance.

3. Personal safety

This appliance may be used
by children aged 8 years
and above and by persons
with limited physical, sensory
or mental capabilities or
lack of experience and
knowledge, provided that
they are under supervision
or have been told how to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents