Connecting to a PC
You can connect a PC to the EasyKey™ Display to:
•
Update ProMix™ II software
•
Use the Data Download software, included in Graco
ProMix™ II Data Download Kit 234668. This kit can
be used to:
•
Update software
•
View
➜ software versions
➜ material usage report
•
Upload
➜ setup values
➜ a custom language to view on screen
•
Download
➜ setup values
➜ job and alarm logs
•
Clear
➜ job and alarm logs
➜ material usage report
•
Reset
➜ factory defaults
➜ password
See Data Download Kit manual for further information.
Connect Cable 118342
Connect RS-232 cable 118342 between the EasyKey™
Display connector (A) and your PC COM1 port. See F
24.
Non-hazardous Area Only
Laptop PC
F
. 24
IG
310653D
The software is designed for COM1 cable connection. If
a COM1 port is not available, follow Changing the
Serial Port instructions, below.
Changing the Serial Port
1. After installing the software, start the Setup program
by double clicking on the ProMixII Setup desktop
icon or select the Setup program from the Start
menu (Start > Programs > Graco > ProMixII Setup).
2. Tera Term window opens, showing the current COM
port being used.
3. Click Setup > Serial Port.
4. The Serial Port Setup window opens. Click the
desired COM port in the Port list.
5. Click OK.
6. Click Setup > Save Setup.
7. Save the file as teraterm.ini in the directory C:\Pro-
gram Files\Graco\Graco ProMixII Log 1.01.
.
IG
Cable 118342
Connecting to a PC ◆ Connect Cable 118342
If a serial port is not available, use an USB to Serial
Port Adapter.
25