Demo Mode - Lincoln Electric Ranger 330MPX Operator's Manual

Hide thumbs Also See for Ranger 330MPX:
Table of Contents

Advertisement

RANGER
®
330MPX

Demo Mode

Note: Demo mode is pre-installed on machines with code number
13011 or higher.
The demo mode is used when the Ranger's display will be shown
for an extended period of time and the engine is not operating.
During demo mode, the battery save function is disabled, the fuel
pump is disabled and the engine maintenance/hour tracking
functions will not increment.
Extended operation in the demo mode may drain the battery. Use
an appropriately sized, listed battery charger when demo mode is
being used for long periods of time.
To configure the Ranger for demo mode:
1. Disconnect the 6 pin engine harness to prevent the engine from
cranking.
2. Turn the Stop/Auto Idle/High Idle/Start switch to "Auto Idle".
3. Go to Set-Up Menu and select "Demo Mode".
4. Select either "OFF" or "ON" for the demo mode.
5. When demo mode is active, "DEMO" will flash in the lower right
hand corner.
B-21
OPERATION

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents