Spark Arrestor Servicing; Storage; Welder Generator Maintenance; Brush Removal And Replacement - Lincoln Electric Ranger 330MPX Operator's Manual

RANGER ® 330MPX

SPARK ARRESTOR SERvICINg

WARNING
• Muffler may be hot
• Allow the engine to cool before installing the spark
arrestor.
• Do not operate the engine while installing the spark
arrestor.
Clean every 100 hours.

STORAgE

To prepare the engine for long term storage, run the fuel purge
routine in the Set-up Menu.
Store the Ranger in a clean, dry, protected location.

WELDER gENERATOR MAINTENANCE

Blow out the generator and controls periodically with low pressure
compressed air.

BRuSH REMOvAL AND REPLACEMENT

WARNING
Do not attempt to polish slip rings while the
engine is running
• Service and repair should only be performed by Lincoln
Electric Factory Trained Personnel. Unauthorized
repairs may result in danger to the technician and
machine operator and will invalidate your factory
warranty. For your safety and to avoid Electric Shock,
please observe all safety notes and precautions.
It is normal for the brushes and slip rings to wear and darken
slightly. Inspect the brushes every 3 months or 200 hours,
whichever comes first.
NORMAL SERvICE INTERvALS
Item Service
Interval
Oil and 5 hours for
Oil Filter first oil
change
100 hours
Air Filter 100 hours
Spark 500 hours
Plug
Fuel 200 hours
Filter
Brushes 1000 hours
D-3
MAINTENANCE
TABLE D.1
Replacement part Part of
number K3494-1
Service Kit
2.0 qts 10W-30 for Y
general use
(-5F to 104F, -
20°C to 40°C)
Kohler 12 050 01
Oil Filter
Kohler 24 083 03 Y
Air Filter Element
Kohler 24 083 02
Air Filter Pre-
Cleaner
Champion RC12YC Y
(.030" gap)
Kohler 24 050 13 Y
Lincoln G9084-C N