Leb Electronics STONE 230 Instructions And Warnings For Installation, Use And Maintenance page 21

Fig. 18 (for 110° opening)
Connecting rod
- Turn the screw on the closing limit switch block in order to get the right
position of the shutter.
Common installation (for all versions)
- Place the foundation box cover
on the base (fig.19).
- Tighten the special screws in
order to fasten the cover.
Fig. 20
- If you need a 110° opening, join
the connecting rod as shown on
the side figure and remove the
opening limit switch block.
- Fix the connecting rod by means
the special screws and washers
(fig. 18).
- Place the " " plate on the cover.
Tighten the two special screws in
order to fasten the plate (fig. 20).
- 20 -
ENGLISH ITALIANO
Fig. 19
U