Leb Electronics STONE 230 Instructions And Warnings For Installation, Use And Maintenance page 20

ENGLISH
STONE intallation - 110° lever version
- Connect the mechanical closing
limit switch on the motor lever as
shown on the side figure.
- Insert the lever on the motor shaft
and fix it by means the special
screw and bolt (fig.15).
Fig. 16 (for 90°or 100° opening)
Opening limit switch
- Join the connecting rod as shown
on the side figure.
- Fix the connecting rod by means
the special screws and washers
(fig. 17).
Warning: the operator is equipped
with two limit switch mechanical
blocks :
- Connect the desired opening limit
switch block on the traction lever as
shown on the side figure.
- Carefully lubricate the pivot of the
foundation box.
- Insert the metal ball in the foundation
box pivot.
Traction lever
- Insert the traction lever on the
foundation box pivot (fig. 16).
Fig. 17
- 19 -
Closing limit switch
- Long for 90° opening
- Short for 100° opening
Fig. 15
Motor lever
Connecting rod