Mark The Area To Be Cut On The Wall Using The Template Supplied; Cut Along The Perimeter Marked; Connect The Audio Cables To The Speaker - Sonus Faber PALLADIO PC-662 Owner's Manual

3.2 – MARK THE AREA TO BE CUT ON THE WALL USING THE TEMPLATE SUPPLIED.
Previously, make sure that the cutting area is between the two uprights!
For correct operation of the fixing system, maintain a distance of at least 4 cm
between the lateral edge of the hole and the nearest upright.
EN
3.3 – CUT ALONG THE PERIMETER MARKED
22

3.4 - CONNECT THE AUDIO CABLES TO THE SPEAKER

Pay attention to the polarities of the terminals during connection.
The connections must be made with the equipment turned off!
23
EN