Mark The Area To Be Cut On The Wall Using The Template Supplied; Cut Along The Perimeter Marked; Connect The Audio Cables To The Speaker; Introduce The Speaker Into The Hole Made - Sonus Faber Palladio Level 5 Series Owner's Manual

3.2 MARK THE AREA TO BE CUT ON THE WALL USING THE TEMPLATE SUPPLIED

Previously, make sure that the cutting area is between the two uprights. For correct
operation of the fixing system, maintain a distance of at least 4 cm between the
lateral edge of the hole and the nearest upright.
EN

3.3 CUT ALONG THE PERIMETER MARKED

16

3.4 CONNECT THE AUDIO CABLES TO THE SPEAKER

Pay attention to the polarities of the terminals during connection.
The connections must be made with the equipment turned off!

3.5 INTRODUCE THE SPEAKER INTO THE HOLE MADE

17
EN