National Instruments GPIB Series Getting Started page 58

Index
A
Add GPIB Hardware Wizard
using, 2-2
adding a GPIB-ENET/100
to GPIB system, 4-1
to network, 2-5
C
cables
Ethernet connection, 2-4
GPIB cable types, 1-2
GPIB connection, 5-3
network cable types, 1-1
power connection, 2-4
caution
using firmware update utility, 6-5
CFG RESET switch
accessing Ethernet Device Configuration
utility, 6-3
if hosts are connected, 6-4
location, 2-4
resetting default network configuration, 2-6
using at power-on, 6-4
using during operation, 6-3
changing network settings, 3-3
comment
to help identify your device, 3-5
common questions, B-4
communication problems
with driver, B-4
with Ethernet Device Configuration
utility, B-6
Configuration Reset switch. See CFG RESET
switch
© National Instruments Corporation
configuring
network parameters, 3-1
NI-488.2, 4-1
connecting
cables, 2-4
GPIB devices (caution), 2-5
connection speed, 1-4
connector types, C-2
conventions, xi
customer education, D-1
D
default configuration
resetting, 2-6, 6-4
specifications, 2-3
default hostname, 2-3
development tools for saving time
GPIB Analyzer, 1-6
LabVIEW, 1-5
Measurement Studio, 1-5
DHCP
communication failure with DNS, 6-3
configuring network settings
automatically, 2-6
configuring network settings without
DHCP, 2-6, 3-1
confirming its availability, 2-5
failing to provide IP address, 6-3
registering hostname and IP address, 3-3
risks for failure, 6-2
time required to complete, 2-6
using, 6-2
using with DNS, 3-4, 6-2
distance capabilities, 1-3
I-1 GPIB-ENET/100 for Windows Me/98/95