Activating And Deactivating Sleep; Maintenance - Philips MC-30/25 User Manual

Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
¶ Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence: 60, 45, 30,15,
SLEEP OFF, 60... if you
have selected a time. Once SLEEP is activated,
SLEEP ON scrolls across the display at
repeated intervals.
Cleaning the Cabinet
¶ Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶ When a disc becomes dirty,
clean it with a cleaning cloth.
Wipe the disc from the centre
out.
¶ Do not use solvents such as
benzine, thinner, commercially
available cleaners, or antistatic
spray intended for analogue records.
Cleaning the disc lens
¶ After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
playback quality, clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
pg 001-021/MC30/22-Eng
¶ To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY-ON on the system
or remote control.
APE TUNER
UX SLEEP
SC
INC. SURR
Cleaning the Heads and the Tape Paths
¶ To ensure good recording and playback quality,
clean the heads
pressure roller(s)
tape operation.
¶ Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
¶ You can also clean the heads by playing a
cleaning tape once.
Demagnetising the heads
¶ Use a demagnetising tape available at your
dealer.
19
Clock/Timer

Maintenance

A B
, the capstan(s) , and
C
after every 50 hours of
A A B C
3140 115 27913
12/7/00, 1:33 PM
19